Frontier Router Lights: All 4 Colors & How to fix them

You may see various lights on your Frontier Router, but do you know what they actually mean? A red light on your Internet symbol might mean that your router is no longer connected to the internet. Such lights are given as an indicator of different situations your router may be facing. It is important that you understand the meaning of all these lights and make proper use of your Frontier router.

In this article, we have shared the meaning of Frontier Router Lights: All 4 Colors & How to fix them. Make sure to go through the entire article to understand all the solutions and try the best one for you.

Frontier Router Lights: All 4 Colors & How to fix them

Power Light, Internet, Broadband, WiFi, Ethernet, and Phone Line are the 6 types of light indicators that you may see on your Frontier router. All of these symbols could show different types of lights like Green, Red, Blue, Blinking, etc. Here we have mentioned what all these types of lights mean and how you can fix frontier router red lights, blinking lights, and more. 

Frontier Router Lights & their meaning

Given below is a description of the light symbol, its different colours, and their meanings. We have also included some solutions for particular colours of light that may be a problem for the proper functioning of your router.

Note that we have given step by step guide on how to fix different light colours on the router in detail in the below article. Make sure to check the detailed guide, or you may end up doing the wrong setup, which may further cause issues in the WiFi functioning.

Frontier Router Light Meaning – INTERNET

• What does it indicate?: As you might have already guessed by the name, this light symbol indicates the internet connectivity status of your router.
• Ideal Color: Solid Blue

Note: It could take around 15 minutes for this light to turn Solid blue during the Frontier Self-installation process. Be patient.

Different Colors of INTERNET Light and what they mean:

• Solid Blue Globe: The Frontier router blue globe light indicates that the internet connection on your router is now active. Just note that this light may take around 15 minutes to turn on during the initial setup, so be patient till then. Once the Gateway is turned on, you will see a solid blue light on the Internet symbol. This is how it should be.
• Solid Red Globe: A red globe light on the Internet symbol on your Frontier router means that authentication has failed or no IP address has been found. this basically means that the router is not connected to the internet. To fix this issue, you can try doing a standard reset either by plugging out the power cord or turning off the power button. After turning the power off, wait for a few seconds and then turn it back on.

How to Fix Frontier Router Red Globe INTERNET

Seeing a red globe Frontier router light can become a little annoying, especially if a restart is not working. In case you are also facing this problem and want to fix Frontier router Red globe Internet light, then we would recommend you to follow any of the below solutions.

Make sure to follow these solutions one by one, as mentioned in the order given below. If you directly jump to solution 4 and factory reset your router, then you might end up losing all the data on it, including the username and password. So start simple.

Fix 1. Restart the Router

One of the simplest yet effective ways to solve a plethora of problems on any electronic device is by restarting it. This might sound very simple, but it is worth giving a try. Sometimes all your device needs is a little kick.

Now there are two ways using which you can restart the Frontier router.

1. Power Cycle Method – To restart your router using this method, simply unplug the power chord of your router by it is still on. Now wait for around 15 to 30 seconds, and then plug the router back into the power socket.
2. Power Button Method – Simply press the power button present on the back side of your router to turn it off. Then wait for around 30 seconds and then press the power button again to turn it back on.

You can choose any method to restart your router and give it a little time to get back to its proper functioning.

Fix 2. See if the Cable is Connected Properly

Many times the reason for the Frontier router red globe signal could be because of an improper or loose connection in the router cable. Check if the cable connection of your router is attached properly and is not loose or damaged anywhere. You also need to ensure that the cables you are using are connected to the appropriate ports.

Now there are various ways in which a Frontier internet setup and installation are done with the cables. You are we have mentioned the different types of router cable connections for your better understanding.

One of the most common mistakes that many people make while connecting their router to the internet with the help of an ethernet cable is using the wrong Ethernet port. This can be a reason by you are seeing a red globe Frontier router light on the internet symbol. Note that the ethernet cable is to be connected to the red ONT port. 

You are not supposed to connect to any of the four yellow Ethernet votes present on the back side of your router. These are to be used if you want to build a wired internet connection between the router and your computer. 

If you have a DSL internet connection, then you can use the white ethernet cable to form a wired connection between the router and your device. But if you have an Ethernet internet connection, then this white cable will already be used, so you might have to purchase a new cable.

Read More – How to Get Free Government Tablet for Low-Income People 

Frontier Arris Router – MoCA Adapter

1. To start with, connect the Coax cable from the wall jack to the splitter side having a single port.
2. Take the second coax cable and connect it to one of the remaining ports on the Splitter and then to the port present on the back side of the MoCA adaptor. This will be labeled as ONT broadband. 
3. Now connect the third Coax cable to the other remaining port on the splitter and then to the port present on the back of the router labeled as a cable line. 
4. Next, you have to connect the ethernet cable to the Red Port on the MoCA adaptor, which will be labeled as RG broadband, and then to the Red port on the router, which will be labeled as o n t broadband.
5. Finally, connect the USB cable to the MoCA adaptor labeled power port and then to the port on the back side of the Router labeled USB. 

After you have connected all these cables properly, wait for around 15 minutes for the installation to process, and then a solid blue globe should show up on the internet light symbol.

Fix 3. Check if there’s a Local Internet Outage

One of the reasons why your Frontier router is showing a red globe light and disconnected from the internet could be because of a local internet outage. This is a very common phenomenon and can happen anytime and anywhere.

What you can do in this situation is use your phone to go to the official website of Frontier service outage web page and see if there are any internet service outages in your area or near you.

Another way to check for any such outage is by visiting the Frontier down detector page. You can see if others have reported is a similar problem around that time.

In case there is any such outage, then all you can do is wait and monitor the situation till Frontier fixes it. 

That’s not much you can do in this situation. But you can use your smartphone data to continue with your day-to-day activities until everything bounces back to normal.

Fix 4. Factory Reset your Router

This might not seem to be the best option, but if you have tried everything mentioned above and still could not solve the Frontier router internet red globe issue, then you might have to perform a factory reset to fix it.

A factory reset is also called a hard reset since it changes any settings on your device back to the original settings. This means that if you have created any new router name or password, then a factory reset will change it back to what it was when the router was brought the first time. 

In order to factory reset your frontier router, you will have to use a paper clip and press and hold the reset button present on the back side of your router for 10 seconds.

In 10 seconds, the reset procedure will start on your router, and then you can release the button. When you see the internet light or Globe glowing, this is when the reset procedure is completed.

While your router is in the process of a factory reset, you may come across any lights flashing through the internet globe. This is very much normal and nothing to be worried about.

Fix 5. Check the Status of your Frontier Account

Yet another reason why you may be seeing the Frontier router red globe could be because of an issue with your Frontier Account. To rectify this, you will have to check the status of your Frontier account by signing in using your Frontier ID. You can log in on this website – https://frontier.com/login.

It could be because of any invalid payment methods or errors in the home address or other personal profile details, which could lead to inactive service. By logging in to your account, confirm that it is active and up to date.

Read More – What does TV PG mean? (All about TV Parental Guideline)

Frontier Router Light – BROADBAND Meaning

• What does it indicate?: This light symbol denotes the status of the broadband connection of your router.
• Ideal Color: Solid Green

Different Colors of BROADBAND Light and what they mean:

• Solid Green: This light on the Broadband symbol means that the WAN connection is active and it is connected to the internet. This is the light you should be seeing on the broadband symbol.
• Blinking Green: A Blinking Green light is an indicator of a loading gateway. It means that the router is trying to connect to the internet. This light will soon turn to solid green when the connection is established.
• Solid Red: The meaning of a Solid Red is that there is no broadband connection at the moment. This issue may arise due to problems in OS settings.

How to Fix Frontier Router Red Line BROADBAND

To Fix Frontier Router Red Line BROADBAND, you can try any of the below solutions, but we would recommend you follow these solutions in the order they have mentioned below.

Fix 1. Restart your Router and the ONT box

Yet again, the easiest way to Fix Frontier Router BROADBAND Red Line is by restarting your router. You can simply turn off the power to both – the router and the ONT box.

Keep them both turned off for about 10 minutes or so and then restart the ONT first and then turn on the router. In case this does not work, you can change the router ISP protocol to DHCP.

In case you are router is connected directly to the ONT box, then we would recommend you disconnect the coax cables and/or the Ethernet on both ends after you turn off the power of the devices. You can reconnect them before you turn on the powers of the devices.

Fix 2. Reconfigure Router Connection Settings

Yet another reason why you may be seeing Frontier router’s Red squiggly Line on the broadband symbol is that there is an incorrect setting of the ISP protocol router connection. To fix this problem, you will have to sign into your router and change the ISP protocol settings to DHCP. 

Given below are the steps on how to change ISP Protocol To DHCP- 

1. Starting with, set the computer’s Wi-Fi to 2.4Ghz WiFi Network Name, which will be given on the sticker present at the bottom of your router.
2. Next, go to the login page of your router. You can do so by typing the IP address “192.168.254.254” in the web browser.
3. Now enter ‘admin’ in the username option and then type in the password given at the bottom of your router. Note that the username for all Frontier routers is the same.
4. After logging in to your router, you can click on the Connection settings from the menu present on the left side of the window.
5. Then go to the Advanced tab in Connection Settings. You will have to change the ISP protocol to DCHP. Along with that, also change the DNS type to Static DNS.
6. Enter “8.8.8.8” in the Primary DNS Address field and “8.8.4.4” in the Secondary DNS Address field.
7. In the end, simply click on Apply to save the changes you have made.

You have successfully changed the router connection settings and updated them. Just give the router around 15 minutes or so to establish in connection. You will see the broadband light turning green in just a while.

In case you a router does not connect even after trying the above method, simply turn it off for a minute or so and then turn it back on with the power button.

Fix 3. Use Frontier Internet Automated Troubleshooting Tool

There is a chance that you are seeing the Frontier router red line on the broadband symbol because of a faulty OS setting. You can check if this is the culprit by using the Frontier network Trouble Shooter tool.

All you have to do is sign in on the given link with your Frontier ID and password and then follow the automatic troubleshooting steps given in the tool.

Fix 4. Perform a Factory Reset

In case none of the above solutions can help you in fixing the Frontier router red light on broadband, then you can try a factory reset as your last option.

Just note that by doing a factory reset, all the data on your router will be erased, including your username and password.

To do a factory reset on your router, you will have to use a paper clip to press and hold down the Reset button present on the back side of your router for about 10 seconds.

It will require the reset process to start in 10 seconds or so, after which you can release this button. You will see the internet light glowing when the reset process on the router has been completed. 

Read More – What Does TV 14 Mean? (TV-14 vs. PG-13 | Key Difference)

Frontier Router Light – WIFI: Meaning

• What does it indicate?: This symbol of light on the router demonstrates the WiFi network status of your router.
• Ideal Color: Solid Green

Different Colors of WIFI Light and what they mean:

• Solid Green: This light on the WiFi symbol means that the WiFi on your router is active, and you can use it. This is a good signal and nothing to be worried about.
• Blinking Yellow: A Blinking Yellow light indicates that your WiFi is now active for 5GHz pairing. Nothing to worry about here as well. You just have to press the WPS button present on the back side of your router to pair it with your device. See below for the step-by-step solution to bring this back to normal.
• Blinking Red: If you see a Blinking Red light on the frontier router, then it could mean that the WPS has timed out.
• Solid Red: A solid red light here would mean that your router has a WiFi network failure and is not working properly.

Frontier Router Yellow Light WIFI: How to Fix

If you see a yellow  Wi-Fi light blinking on the symbol, then it means that the WPS or Wi-Fi Protected Setup this active and ready to pair with a 5 GHz user.

For pairing a device, you need to push the WPS button present on the bottom side of the router for around 5 seconds. Then you can push the responding WPS button present on the device.

This WPS button will help you establish the connection by just pressing a button and without having to use any Wi-Fi password. You can any time turn off the WPS pairing. For this, all you have to do is sign into your router and disable this option.

How to Fix Frontier Router Red Light WIFI

The Wi-Fi Frontier router blinking red light could mean that the WPS has timed out. Whereas a solid red Wi-Fi light on Frontier router means that there is a wireless network failure. In such a situation, the Wi-Fi does not function as usual, and this needs to be fixed.

You can try any of the below-mentioned methods to solve the problem but make sure to go in the order given below.

Fix 1. Restart the Router by Unplugging the Cord

Yes, you can solve the Frontier router red light for the Wi-Fi issue with Restart as well.  All you have to do is directly unplug the power chord of your router while it is still on.

Then wait for around 15 to 30 seconds, after which you have to plug in the router cable back into the power socket and give the router around 15 minutes to form a Wi-Fi connection.

Fix 2. Disable and then Enable WPS

Yet another effective way of fixing the Frontier router Wi-Fi Red light problem is disabling and then Re-enabling the WPS or Wi-Fi-protected setup. For this, you can follow the below simple steps:

1. First of all, go to the login page of your router by typing the IP address “192.168.254.254”  on your browser.
2. Now enter ‘admin’ in the username option and then type in the password given at the bottom of your router. Note that the username for all Frontier routers is the same.
3. After logging in to your router, you can click on the Wireless option from the menu present at the top of the window. Click on the WPS option from the menu on the left side.
4. Now under the tab of Radio Selection, firstly select 2.4 GHz Radio and then under the tab of Wi-Fi Protected setup, select the option of Disable and then click on Apply. Follow the same steps for 5 GHz Radio.
5. Finally, choose the Radio Selection that you want to use and then select Enable and Apply. 

You are done here. Just wait for a few minutes and see if the Wi-Fi connection problem has been solved.

Fix 3. Change 2.4GHz and 5GHz SSID Names

Majority of the routers Frontier routers are of dual frequency as well. This means that your gateway has two different frequency channels – 2.4 GHz and 5 GHz. To fix your red light on Frontier router Wi-Fi, you must ensure that the SSID names for both these frequencies are different. 

In case the SSID names for both these frequency channels are the same, then be ready to face various issues related to Wi-Fi. 

If you think this could be the problem with your router, then you will have to check the SSID names of these frequency channels by logging into your router with the help of the steps mentioned below. 

1. First of all, go to the login page of your router by typing the IP address “192.168.254.254” in your browser.
2. Now enter ‘admin’ in the username option and then type in the password given at the bottom of your router. Note that the username for all Frontier routers is the same.
3. After logging in to your router, you can click on the Wireless option from the menu present at the top of the window. And then, go to Basic Settings 5 GHz from the left side menu. Here look at the network name that is SSID given to the 5 GHz frequency.
4. Now go to Basics Settings 2.4 GHz from the same menu on the left side and take note of the SSID name of this frequency channel.
5. If you notice that both the names are the same, then you will have to change one of them.

Once you change the name of any of the frequencies, if it is the same, then you can wait for a few minutes or restart your router to see if it’s working properly now.

Fix 4. Disable Proxy Server for LAN

An error in the proxy server could also be a reason why you are facing issues with your Wi-Fi light on the Frontier router. You can try disabling the proxy server for your LAN, which is Local Area Network. This will help you in fixing the issue if the cause is this.

If you don’t know what a proxy is, it is basically a type of filter or Gateway between the internet and your device. This proxy tends to act like a Firewall at times which would result in the blocking of the Wi-Fi connection to your device.

If the above methods did not help you yet, then you can try disabling the proxy server. For this, you can follow the below simple steps.

1. To start with, in the Windows Search bar, look for the option – Internet Options and then click on the internet options that show in the search result.
2. Now click on the Connections tab and then choose the LAN Settings option.
3. In the LAN settings, simply uncheck the option of Use a Proxy Server for your LAN.
4. Then click on OK, Apply and again click on OK to save the changes you have made.
5. Lastly, restart your computer.

After the computer reboot successfully, you can try connecting to the Wi-Fi again.

Fix 5. Relocate your Router

If you are looking at this solution, then we assume that none of the above methods have helped you yet. But don’t worry, as relocating the router might just be the ideal solution for your problem. 

As you may know that the location of your router plays a crucial role in the strength of your internet connection. You can try relocating your router to a central and high-up location above other devices.

If you have placed it below or near the ground, then a wall or other items can interfere with its signal and does give a low coverage. 

You can try placing your router in an open area such that it is located centrally in your home at a higher position. Never place the router behind a TV or in a cabinet. Try to keep other devices away from the router.

In the case of a Frontier router, it is better to stand it vertically in an upright position.

Fix 6. Perform a Factory Reset

Yes, again, factory reset will be your last option if none of the above methods works for you. Before you factory reset your router, note that all the data on it will be wiped out after the reset.

In order to factory reset your frontier router, you will have to use a paper clip and press and hold the reset button present on the back side of your router for 10 seconds.

In 10 seconds, the reset procedure will start on your router, and then you can release the button. When you see the internet light or globe glowing, this is when the reset procedure is completed.

Different POWER Lights and their Meanings

• What does it indicate?: As you can guess by the name, the power light shows the power status of your router.
• Ideal Color: Green

Different Colors of Power Light and what they mean:

• Solid Green: A Solid Green on the power symbol of your router means that the router is connected to power and ready to be used.
• Blinking Green: You will mostly see a Blinking Green light right after you have connected your router to a power source. This light basically means that the router has just started working and will be ready to be used soon. After it is ready, the colour will automatically change to solid green.
• Red: This type of light means that there is some type of an error with your router, and it is not starting as it is supposed to.
• No Light: If there is no light in the Power Symbol of your router, then it means that the router is offline and is not connected to any power source. It won’t work until you have connected it to some source of power.

What if the Power light on my router turns RED or does not turn on?

If the power symbol on your router shows a red light even after connecting it to a power source, then you need to unplug the connector and wait for a few minutes. After that, you can try connecting it back to the power socket. Also, see if the cable connection is damaged or not. This might be a reason for the red light.

If the power symbol on your router does not show any light, then mostly it could be because you have not connected the plug to the power socket. See if this cable is connected properly, and also check for any damage anywhere on the cable.

A problem with the power socket might be a reason in both the above cases. So try plugging the router into some other power socket.

Different ETHERNET Lights: Meaning

• What does it indicate?: The Ethernet LED Light on your router indicates the connection between your router and the device that you have connected with it.
• Ideal Color: Green – Solid/Blinking

Different Colors of Ethernet Lights and what they mean:

• Solid Green: This light on the Ethernet LED means that the connection between the two devices – your router and the device that you have connected it to, is established and active. You can use your device.
• Blinking Green: This type of light means that there is a data transfer taking place between the two connected devices. It happens a lot of times, and thus, is nothing to be worried about.
• No Light: If you see no light on the Ethernet LED on your router, then it means that no device has been connected to your router yet.

What if I have connected my device to the router, but there is no light in the Ethernet?

If you have connected your device to the router, but no light is showing on the ethernet led, then try checking both ends of the ethernet cable. If they are loose or not attached properly, then unplug them and then plug them in the proper way.

Do not forget to clean the ethernet port from time to time since accumulated dust particles might be a reason for no light in the ethernet. Some type of physical damage to the wire may also cause the light to be inactive.

Phone Line Lights and their Meaning

• What it Indicates?: Phone Service and its status of Connectivity.
• Ideal Color: Green

Meaning of Different Colors of Phone Line Lights:

• Green: A green line on the Phone Line Light symbol indicates that your phone service is active and can be used.
• Yellow: A Yellow line on the Phone Line Light symbol denotes that a phone call is in process.
• Red: This light in the Phone Line symbol means that there is some sort of error in the phone service.
• No Light: This means that the phone has been disabled.

What if the Phone Line on my router is RED?

Check if the phone line connection cables are well attached to the modem and the wall. In case you see any loose connections, make sure to tighten them. Just once reboot your device after solving the issue.

Concluding Thoughts

That was all about the meaning of frontier router lights and solutions for problematic lights. We hope we could help you out here. In case of any queries, ask us in the comment section below!