Just imagine you have purchased a new Vizio TV, and you are all set to watch a new show on your new Vizio TV.
Suddenly a blue tint appears on the TV, and you start tapping your remote, plugging off your TV and your whole mood gets spoiled.
I can feel you,
There are several reasons why these minor issues occur in any electronics; sometimes, the settings are not updated in new TVs, which can cause these issues.
Fortunately, this is a very common issue which many buyers face, so if the problem is common, then I’m sure the solution will also be the common one.
So let’s get into the next part of this article to fix your Vizio TV blue tint.
Vizio TV Blue Tint
If you are also looking for the solution for your Vizio TV blue tint problem, then you should adjust the picture settings of your Vizio TV; try to reset your picture setting by clicking on MENU Button > then PICTURE> MORE> RESET PICTURE MODE. You can also turn off the AMBIENT LIGHT SENSOR by going on the PICTURE option.
Why Does My Vizio TV Look Blue?
You might be wondering what causes this blue tint on your Vizio TV and why your Vizio TV always turns into a blue tint.
Here are some reasons why your Vizio TV has a blue tint.
- Make sure your Vizio TV color settings are updated; sometimes, your TV’s color and display settings are not set correctly, which causes the blue tint.
- Sometimes, we don’t notice our cable connections or HDMI ports, so ensure that your cable connections are connected properly and it doesn’t any cut on the wire.
- During manufacturing, sometimes the lead gets defective, and this problem may be caused because of the broken Backlight of your TV, so make sure that you check your TV’s blue LEDs.
- Maybe the source or input device isn’t set correctly; if a coaxial cable connects your TV and cable box, your TV must be set to a program channel input rather than a TV input to receive a signal.
How can I fix my Vizio TV Blue Tint?
Power Cycle Your TV
Power cycling your TV is well-known for resolving most TV difficulties, so you can try it if your TV has a blue tint.
Fortunately, power cycling your TV is a simple process. You don’t need to contact your maker to power cycle your television because you can do it from the comfort of your own home.
Here are some basic steps to power cycling your TV and removing the blue tint.
- The first step is to unplug your TV from its primary power source or socket.
- Do not immediately reconnect it after unplugging it. Keep it unplugged for around 10-15 minutes.
- You can only do this if your television has a power button. If your Vizio TV has a power button, hold it down for up to 5 minutes without letting go. You can skip this step if your TV does not come with a power button.
- Reconnect your TV to the power source or socket.
- After you’ve plugged it in, switch on your television.
Change Picture Mode
As previously said, a blue tint on your TV could be caused by incorrect picture settings. The best thing you can do is change the picture mode to adjusted.
Furthermore, increasing the brightness of your TV can help eradicate the blue tint. The image is the most accurate technique to set your picture mode.
You can do the same by pressing the “Menu” or “Settings” button on your remote control and select “picture settings” or a related option to manually adjust your TV.
Then, among other things, you can change the picture mode, brightness, and contrast.
You can also try the cinema or movie theatre presets for a more realistic image. This will help you acquire authentic colors as much as possible.
On TV, the dynamic Mode can be defined as lively. We recommend using the dynamic mode if you want more vibrant colors.
It would be beneficial if you paused your TV on a blank screen to observe the colors in great detail.
Adjust the brightness with your remote until the blue tint disappears and you get the best colors without obscurity.
Change Color Temperature
Another method for removing the blue tint from your TV is to change the settings from bold colors to normal color temperature.
The vivid setting is renowned for producing the most vibrant color temperatures and snappy visuals at first glance.
The same is true for sports and dynamic modes. Changing the vivid settings is the finest thing you can do.
These styles and presets are known to degrade your images. You should be aware that various settings can influence how your TV operates.
Some can create lags, and in this case, they could be the reason why you are noticing a blue tint.
Color temperature, gamma/contrast enhancers, Backlight, motion interpolation, and edge enhancement are the five characteristics that can be changed to alter the vivid color temperature.
To acquire the optimum normal settings or normal color temperature, you must have your colors professionally adjusted.
Suppose you don’t know how to adjust colors. In that case, you can hire a professional who will synchronize your colors using specialized color equipment.
The color temperature influences the amount of white in a given color. Warmer colors are usual and appropriate.
Replug your HDMI cable and reconnect it.
You can also troubleshoot your HDMI cable to get rid of the blue tint on your TV. This can be accomplished by unplugging it and then plugging it back in.
When you plug it back in, make sure to exert pressure and push it to the end.
It would also assist if you switched the sides of the cable by inserting one side into your TV and the other into your device, and vice versa.
Unplugging and replugging your HDMI cable is an excellent technique to send a signal to your device and TV. They can then reboot and turn it on again.
Just keep in mind that unplugging and plugging in the HDMI cable regularly will damage your HDMI chips, which are prone to breaking.
If your HDMI is the source of the blue tint on your TV, unplugging and replugging it will reset your device. The HDMI cable is now correctly connected.
In this manner, there will be no blue tint after the reset.
Factory reset Vizio TV
Cause– Maybe the TV OS has some problem or the OS is brick, so to fix you can read below.
Solution – Click the Menu button after the TV is turned on (ideally, disconnecting it or removing the remote batteries was able to temporarily power the TV).
There should be a “System” option in the menu; choose it.
Afterward, locate “Reset & Admin” and “Reset TV to Factory Defaults.” Before resetting the TV, the Vizio TV will occasionally ask for a code. If it does, the default code is 0000, which is four zeros.
In essence, this will revert your Vizio TV to the configuration it was in on the day you bought it.
Factory reset Vizio TV without a remote
You may still factory reset your Vizio TV even if you don’t have access to the remote control for whatever reason.
To do this, locate the TV’s power button. This might be on the right side, left side, or very bottom of the device, depending on the model you have.
Press and hold the source and volume down keys simultaneously with the TV on. Your TV will instruct you to push and hold the input button after a brief delay. The input button must be pressed and held for at least 10 seconds.
After doing this, the TV will be rebooted, turned off, and factory reset. It can take a minute or so to reboot and reset.
You should now have completely repaired your power problems, but just in case, I’ve added a few extra procedures worth attempting before giving up.
Update your Vizio TV
If the software on your Vizio TV is out-of-date, it may experience a variety of problems. Simply look for any new Vizio TV OS upgrades to fix this issue.
All you have to do is search for the latest firmware update for your TV model. These upgrades often take place automatically, but occasionally they are overlooked.
Turn on your Vizio TV and press the “Menu” button on your remote to upgrade the firmware. Then pick “System” by scrolling down.
Click on “Check for Updates” if you can see it.
Now, your TV will begin searching for any available upgrades. Your TV will install the new one for you if there is one.
To stay current with the newest software, you should make sure your Vizio TV receives frequent updates. By doing this, you can be confident that your TV will continue working with the YouTube App.
While you’re about it, you might think about checking for YouTube App app upgrades. Your current Vizio TV OS may not function properly with older versions.
Replace Backlight Strip
Every LCD TV has a backlight. So, you can also replace your Backlight.
Although the Backlight contributes to bright and efficient light, its warm color temperature can occasionally generate a blue tint.
This warm temperature is sometimes to blame for the blue tint on your TV.
A damaged backlight is especially noticeable while viewing white colors. This can alter if you modify the color temperature on your TV.
If the problem persists, it could signify that your Backlight is faulty and has to be replaced.
If you observe it in white and other colors, your Backlight is faulty. Even if you change the color temperature, you will still notice it.
When you hold a flashlight close to your screen and observe the backlight bleed, you know you have a malfunctioning backlight.
Taking your Backlight in for repair is the quickest way to replace it. Please do not try to repair it yourself.
Or better yet, you can take it to your manufacturer. They will repair the Backlight if you have a valid warranty. If you are lucky, they might give you a new TV.
Change the color percentages to drown out the blue tint.
If you try the recommendations above and still have a blue tint on your TV, the best thing you can do is discover a color balance that works for you. This will drown out the blue tint.
Blurring the blue tint is an easy solution to get rid of the blue tint and enjoy your TV if you cannot afford a new backlight or TV.
On your remote, click on the TV menu. Many options will appear on your screen.
Before changing the percentage of colors, you should try this Mode to see if the problem goes away. Consider using image mode, cinema mode, or display mode.
You might experiment with warm and cool settings to see if it blurs the blue tint.
Most TVs allow you to modify many color characteristics such as colors, brightness, contrast, colors, light sensor, and auto image mode from 0 to 100. So change the parameters until the blue tint fades.
Change Input Source Connected to TV
So, suppose you’re having problems with the blue tint on your TV. In that case, I strongly recommend that you try replacing the current input source connected to your TV to see if this repair helps you.
And changing your input source is quite straightforward.
The first thing you should do is push the input button on your remote. The input source screen that you are now using will be displayed on your TV.
You can now use your remote’s arrow keys to select the input sources you want to modify from your primary input sources.
You can now set the new source by pressing enter to confirm your decision, and you’re done. It’s that simple.
Check Vizio Panel Boards
If you’re unfamiliar with the term “scalar PCB,” it’s the Scalar Printed Circuit Board. This is in charge of retrieving pixel data from the motherboard and delivering it to the T-Con board.
When the Scalar PCB fails, your Vizio television may appear blueish. If your Scalar PCB is damaged or overheated, you should have it replaced.
You should only do this in a repair shop unless you fix TVs for a living, in which case you probably aren’t reading this. If you try doing this yourself, you will probably harm the board itself.
COF ICs are commonly found in LCD, OLED, and LED television displays. It controls how pixels appear on your screen and ensures they format consistently.
If they don’t, this could explain why your Vizio is blue. If it is damaged, it should be replaced.
Replace TV Screen
If you still see a blue tint, depending on the type of your TV, you should consider changing the screen.
Replacing your TV screen isn’t as difficult as you might assume. However, it may come at a cost, so keep that in mind.
You should first go to your local repair shop, ideally a Vizio Repair shop, to replace it. The best way to locate the nearest repair is to visit the manufacturer’s website.
The size of your screen will determine the price you pay. You will have to pay more if your screen is larger than 32 inches.
Check that all cables are properly connected
Your TV will most likely have a blue tint because your wires are not properly plugged in,
So, before you panic that your TV is broken, double-check that all of your cords are properly plugged in.
If your connections are not properly connected, this could be the cause of your TV’s blue tint. Check the TV cable, as the saying goes.
Check that it is completely placed into the socket. Check other cables, such as HDMI, to check that both sides are inserted into the end.
The simplest method to accomplish this is to turn off the TV, properly adjust the wires, and then switch the TV back on to see if the blue tint has gone away.
Vizio TV support
If your Vizio TV is still sluggish after following all the above troubleshooting methods, immediately get in touch with the Vizio TV support staff.
Contact them at 1-844-254-8087.
8:00 AM to 11:00 PM CST, Monday through Friday.
8:00 AM to 9:00 PM CST on Saturday and Sunday.
The shortest wait times are from 1:00 PM to 5:00 PM CST, Monday through Friday.
You may also try their Live Agent chat or Text Message help.
Vizio TV warranty
You may also check online to find out if your TV is protected by the Vizio warranty.
Unfortunately, the Vizio TV warranties only last one year, and the majority of complaints I hear about TV lag are from TVs that are already a few years old.
It’s still worth a try.
Frequently Asked Questions
How do I Fix my Vizio TV’s blue tint?
If your Vizio TV has a blue tint, navigate to All Settings > Picture on your TV. Choose Picture Mode Settings > Picture Mode, then Cinema or Cinema Home. Your blue tint should be gone.
Why does my TV have a blue tint?
The TV is operational; however, it has a blue tint. The LED Backlight on the television is broken. The majority of flat-panel LCD TVs contain an LED backlight.
Although an LED backlight is bright, small, and energy efficient, LED lighting frequently has a cold color temperature that imparts a little blue tint.
What are the best Vizio TV color settings?
These are the best color settings for a Vizio. If utilized correctly, the equipment should provide better photos. The Vizio D Series is one of the brand’s most popular models. If you want to achieve the finest color on this device, keep the color at 50.
You now understand why your Vizio TV has a blue tinge. Better yet, you understand how to remove the blue tint from your Vizio TV or any other TV.
Your TV may have a blue tint because you have an improper color setting on your TV or device. It’s also possible that your Backlight is malfunctioning or broken.
Faulty cables, such as broken HDMI and video cables, are also key sources of a blue tint, as you have seen. Or perhaps you did not properly install these cords.
To remove the blue tint from your TV, make sure you have the correct color settings.
Finally, change your input and double-check that your cables are properly plugged in and connected to the correct output.
That is how you resolve the blue tint issue on your Vizio TV. Which of these solutions worked for you? Tell us in the comments section below.
Leave a Reply