The working remote control is one of the most crucial parts of simply controlling your Vizio TV. When this tool stops operating, there could be a serious problem.
So, what should you do if your Vizio TV remote not working?
If your Vizio TV Remote Not Working does not respond or control the volume, try replacing the battery and removing any obstruction blocking the tv.
Power cycle the remote, press any stuck buttons, sync the remote with the power, or turn on the TV.
If you possess a cool Vizio TV and suddenly realize that your remote is no longer working, not responding, or cannot manage the volume, read our article to fix it so that you may relieve all of your remote troubles.
Contents
Vizio TV Remote Not Working
Remove the back panel, remove the batteries, and hold down the power button on the remote for 30 seconds if your Vizio TV remote is not working. Next, mash all of the buttons and pat the remote against your palm a few times. Replace the batteries.
What Are The Causes of Vizio Remote Not Working?
- Dirty Power Source: If the TV’s power source is supplying dirty power to the system, you may experience the current issue.
- TV and Remote Power Residues: If there are power residues in the remote or TV that can affect their capacity to send or translate the IR beam, you may be experiencing the current difficulty.
- Stuck Remote Memory: If the remote’s memory has become stuck on a specific place or device, you may have troubles similar to the current one.
- Defective TV: If your television has become faulty, you may be affected by the problem.
- Power Drain Batteries: If the remote’s batteries are completely depleted, you will be unable to use them.
- Blocked TV Sensor: This error can occur if the IR beam cannot reach the TV due to an obstruction between the remote and the TV sensor.
- Electronic Interference: If other devices in proximity emit radiation that interferes with the IR ray of the remote, you may experience the current mistake.
Confirm Remote’s IR Sensor is Working
Before proceeding with the answers, we must first determine whether the remote emits IR (if you use an IR remote). A simple camera test can accomplish this.
You can use a digital camera or a camera on a mobile phone.
Turn on the camera and then look at the remote control device through the camera’s screen.
Point the remote control’s end (the one that ordinarily points to the TV) towards the camera.
Press and hold any button on the remote, and you should see the light flashing from the IR LED at the end of the remote on your camera screen.
Check the remote’s buttons, notably the Power and Volume buttons, to check whether they work.
If none of the buttons operate, the remote may be defective (trying the final solution might solve the problem, or take it to a repair shop or buy a new one).
If only a few buttons fail to function, their contacts may be unclean or worn out from use (take it to a repair shop or buy a new one).
If all of the buttons are operational, you should proceed with the troubleshooting procedure.
Power Cycle the Remote
Power residues or remnants might cause the Vizio remote to stop working.
Power cycling the remote resets it and drains any remaining power residues even if you are not using it.
Power cycling is typically performed to ensure that all temporary configurations are entirely reset.
May resolve any errors in the remote’s settings. It can also loosen a remote button that you were unaware was stuck.
- Remove the remote’s batteries.
- Hold down the power button on the remote. It is usually near the top of the remote control.
- After five seconds, press and hold the power button. And any remaining power from the remote will be drained.
- At least once, press each button on the remote. This will aid in the release of any stuck buttons. Remove any remote control buttons stuck into a constantly pushed position; otherwise, the remote control will not respond to any other user input.
- Replace the remote batteries in your remote.
Check to see if your remote has begun to work properly.
Power Cycle the Vizio TV
If a Vizio TV is in an incorrect condition or any of its functions are not operating, it may become unresponsive to all inputs, such as changing the channel using the remote control.
Power cycling the television may resolve the issue. In the last article, we used the same methodology.
- Unplug the television from the wall outlet.
- Hold down the power button on the TV (typically situated on the side) for 30 seconds to drain the residual power and perhaps resolve the unusual difficulties.
- Allow one minute.
- Now reconnect the TV to the power supply and turn it on.
- Check the remote control again to ensure that it is in working order.
Reset Remote to Clear the Memory
The memory stuck on a certain point or device is a more prevalent fault with Vizio Universal Remotes.
Resetting these remotes may cure the problem in that instance. This method will not work with non-universal remote controls.
After cleaning your remote’s memory, you must reconnect it to your various devices, such as a DVD player, as the connections to these devices will be reset.
Hold down the SET or SETUP button. Normally found in the remote control’s top-left corner.
When the LED light blinks twice, press and hold the SET button, the LED light on your Vizio universal remote control is often situated near the top of the remote control.
Enter your remote’s reset code; most Vizio universal remotes have a reset code of 981 or 977. You can also look in the instructions for your remote to locate the reset code.
Wait for the LED to blink twice before proceeding. The Vizio universal remote has successfully erased its memory after flashing twice.
Following this, any firmware issues should be rectified. Now you can fix it with your TV.
Now connect the remote to the TV. The perplexing thing about Vizio remotes is that they have TWO spots on the remote where you can switch to the appliance you want to operate.
One of the buttons is located on the TOP of the remote control, while the other is located on the BOTTOM of the remote control. Using the BOTTOM, return to TV mode.
Check to see if your remote has begun to work properly.
Remove obstacles that could be blocking IR signals
The IR sensor on the TV is blocked and cannot receive the IR signal; your Vizio smart TV remote may not be operating.
The IR sensor of television is often situated on the bottom left or bottom right of the television.
Even translucent things, such as the protective plastic wrap that comes with new TVs, might block the infrared signal from your remote.
- Find the TV’s infrared sensor.
- Move anything in front of the television.
- Look for any obvious smudges on the sensor as well. Using Alcohol to clean the front of the sensor is a good idea.
- Now, point the remote towards the TV’s IR sensor and push the “Power” button. Ensure you’re within 10 feet of the TV because IR signals only function up to a certain distance.
- If the TV turns on or off, it means that something is blocking the IR signal.
Change the Power Source
“Dirty Power” refers to abnormalities in the power quality given to a device. These anomalies include voltage changes, low power factors, frequency variations, and power surges.
If your TV is connected to a soiled power source, you may experience Vizio Remote Not Working.
Remove the Vizio TV from the power supply.
Move the Vizio TV and connect it to another power source where power is known to be normal.
Restrict Electronics Interference
Nowadays, our lives are filled with electronic devices. This electronic equipment emits various radiations, and if these radiations interfere with the IR signal of the remote, the remote will cease working.
- Identify any other electronic devices or lights that are turned on (CFL) in the remote sensor’s “field of view.”
- Turn off those gadgets or relocate them to a different area.
- Cover the IR sensor on the front of the receiver with a piece of blue painter’s tape or plain brown masking tape. Painter’s tape can filter out stray IR from other devices while allowing the remote signal to pass through.
Check to see if the remote is working properly.
It may appear unusual initially, but pressing all the buttons on the Vizio remote might allow it to function again.
A button on the remote is frequently stuck. If one or more buttons on your remote become stuck, the other buttons will not function.
When you press many keys on a keyboard, it stops responding to keystrokes.
A remote button can become stuck in a variety of ways. Maybe it got stuck in a crack between the couch cushions, and dirt got lodged under the rubber.
In any case, it’s a really frequent and simple problem to resolve.
While crude, mashing all the buttons and smashing the remote against the palm of your hand a few times can pop the buttons back out.
Turn it over with the buttons facing down and slap the back to let dirt fall out. Don’t be concerned; Vizio TV remotes are quite durable.
Check the Batteries
The remote’s functionalities are powered by batteries.
If the battery power has been depleted, the remote’s contact points have rusted, or Carbon (the white stuff) has developed, the Vizio remote may stop operating.
Most Vizio remotes require two AA or two AAA batteries.
Remove the batteries. Batteries are often inserted into the slot at the bottom of the front side of the remote or the rear of the remote.
Check the battery connection points/terminals to see whether they have rusted out or if Carbon (the white substance) has accumulated over there; if so, clean the points with Alcohol.
Insert the new batteries into the remote. Check that the batteries are inserted correctly, with the positive and negative ends facing the same way.
If your remote is still not working, try another Vizio remote with the TV; if the second remote works properly, replace your remote.
Most VIZIO remotes are compatible with most VIZIO televisions. If the other remote does not work with the TV, it is a good idea to get your TV checked by a repair company.
If the other remote is working properly, replace your Vizio Remote since it may have internal or external damage that is causing it to malfunction.
You can use another Vizio remote or a universal remote to replace the remote.
Liquid Damage
The next most likely problem is that liquid got inside the remote and ruined the button circuits.
Liquid damage is rather prevalent, and it is frequently the cause of particular buttons on a remote not working.
If liquid did get inside your remote, it might create a residue that prevents the rubber buttons from fully contacting the circuit pads.
Liquid damage is most likely to blame if you have to push one button very hard for it to register. Soft drinks can leave a sticky residue that might cause various issues.
You might try a fast DIY fix and disassemble the remote to clean the inside components from here.
If you’re not comfortable doing it, I propose looking up the model of the Vizio remote online and purchasing a replacement.
But if you’re interested in pursuing a new endeavor, keep reading. What’s the worst that might happen? The remote is already broken!
Open Remote Case
To remove any liquid residue, open the remote casing and clean the rubber buttons, circuit board, and plastic panels. It’s a simple job, and most Vizio remotes are screw-free.
To begin, we must first open the Vizio remote. Remove the batteries before pressing the power button a few times to discharge the remote.
Hold the remote on its side and insert a flat-head screwdriver into the gap between the panels near the OK button in the middle. You may need to wiggle it a little.
Widen the gap with another screwdriver, then twist the screwdriver until you hear a portion disconnect. Slide the screwdriver further down the case, removing each section.
Check the Circuit Board Pads
The circuit board pad is likely to be slightly overused or to have stains from liquid damage. To remove the stains off the circuit, use Alcohol.
Another fascinating approach is to write along the lines of the circuit board pad tracks with a pencil.
This is because the graphite in pencil improves conductivity, making it simpler for the pad to register pressure.
When you’re convinced that everything is clean, it’s time to reassemble everything.
The circuit board is installed first in the back plastic panel, followed by the rubber button pad on the top panel.
Check that they are securely seated in their appropriate panels.
Connect the two panels and squeeze them together to ensure a secure connection. Replace the batteries and test the Vizio remote.
After all that effort, hopefully, the Vizio remote will start working again. If it still won’t function after all of these changes, the last option is to buy a new one.
Although Vizio remotes are not expensive, it can be irritating to wait for shipping while unable to use your Vizio TV.
Frequently Asked Questions
Why won’t my Vizio TV remote control the volume?
When it comes to your total experience with Vizio TV, the picture is important, but so is the loudness.
You can better control your environment by being able to change the volume on the TV when you require music, when an action movie is playing, or when others are present in the room.
What should you do if your Vizio TV remote does not adjust the volume?
If your Vizio TV remote is not controlling the volume, it could be due to a simple issue with jammed volume buttons.
To test if the buttons are jammed, see how they begin to press a little more easily before simply hitting the buttons swiftly and carefully.
This should bring back the volume control.
How do I reset my Vizio remote?
- To begin, wipe memory or reset the television to its factory settings.
- Press the menu button on the VIZIO remote.
- To highlight the system, use the arrow buttons on the remote and press OK.
- Reset, then select admin and click OK.
- Select the Reset TV to Factory Defaults option and hit OK.
Why is my TV not responding to my remote?
Unplug all TV cords and attachments, including antenna cables, HDMI cables, CI + modules, surround systems, etc.
Unplug the TV from the wall socket and wait at least one minute after the LED light turns off.
Simply reconnect the power plug after one minute. Use the remote control to turn on the television.
If the TV does not respond, press its button/joystick to turn it on.
If the television turns on and the remote control works again, the external devices can be reconnected to the television.
Check after each device is connected to see if the remote control is still operational. An external device can cause issues. Check that the TV’s software is up to date.
How do I fix an unresponsive remote?
Remove the remote control’s battery and press any button on the keypad to discharge any accumulated current.
If feasible, test the batteries to ensure that they are fully charged or replace them with new ones.
Replace the battery in the remote control properly.
Why is my soundbar not working on my Vizio TV?
If you have a soundbar, you can anticipate your remote to be able to manage the volume on that device as well, though some users have reported remote failure in this area.
Suppose your Vizio TV remote does not operate the soundbar. Your remote may not be properly synced.
Conclusion
Here are the main solutions for your broken Vizio remote:
- Remove the batteries from your Vizio TV remote and repeatedly push the power button.
- Confirm that the IR sensor on your Vizio remote is operational.
- Remove any impediments to IR signals between your Vizio TV and remote.
- Smack all of the buttons on your Vizio TV remote against the palm of your hand many times.
- Try a new set of fully charged batteries.
- Unplug your TV from the wall, wait 30 seconds, and then restore the power.
Disassemble your Vizio remote and wipe the circuit board and rubber button panel with 99% Isopropyl alcohol to remove liquid damage residue.
Leave a Reply