Vizio tv stuck on logo (Here’s Why & How to FIX It!)

Vizio has always kept up with the ever-changing world of television technology by regularly releasing fresh features with their TVs.

But they’ve also had their fair share of challenges, one of which was being stuck on the logo.

Why is my Vizio TV stuck on logo? This problem could be caused by a variety of factors, including a poor or inconsistent Internet connection, among others. In any event, you can overcome this problem using one of the solutions listed below.

So, how do you fix a Vizio TV that is stuck on the logo? Scroll down for more information.

Fix Vizio tv stuck on logo

If your Vizio TV is stuck on the logo, then resetting the EEPROM on your Vizio TV will reset it. Unplug the TV power source and press the power button on the Vizio TV for 60 seconds to reset the power cycle. Press and hold the power button on the TV to check if it comes unstuck.

Why is My Vizio Smart TV Stuck on Logo?

Many factors can contribute to such problems when utilizing a Vizio smart tv. Some reasons are major, while others are minor; we’ve listed some factors that can cause Vizio TV to become stuck below.

• Power struggle: The Vizio TV logo may become locked on the screen due to a power struggle.
• A brief issue may prohibit your Vizio tv from performing its function effectively.
• The broadcast channel is frozen: The channel you are attempting to watch may be frozen.
• Loose cable or wiring problem: When the TV cable becomes loose or has a wiring defect, the TV becomes stuck on the logo.
• Internal hardware issue: An internal hardware issue could be the cause of the Vizio tv stuck problem.
• Problem with overheating: An overheated Vizio television may begin stuttering and freezing.
• Incomplete software update: Outdated Vizio tv firmware can potentially cause problems.

Power Cycle Your Vizio Smart TV

Suppose your Vizio smart tv is stuck on the logo or configuration screen. In that case, a power cycle can occasionally solve the problem. Follow the steps below to correctly power cycle your Vizio smart tv.

• Using the remote, turn off your Vizio smart tv.
• Unplug the Vizio television from the power outlet.
• Remove any wires or gadgets that are attached to your Vizio television.
• If a physical power button is provided, push it for 20 seconds to discharge the current.
• Wait for around 10-15 minutes.
• Plug in your smart television and turn it on.

Most Vizio tv users will be able to resolve the Vizio tv stuck issue by following the instructions outlined above. If the problem persists, the troubleshooting steps listed below can assist you.

Bug or Software Malfunction

Bugs in your Vizio TV are one of the most common causes of this problem, in which your Vizio TV is stuck on the logo.

Bugs will create many problems inside the TV System, preventing access to additional functionalities or causing the Vizio logo to freeze on the screen.

A bug is a technical malfunction or fault in your device’s hardware or software. Bugs are not caused by plainly identifiable factors.

In most cases, bugs appear out of nowhere and are tough to pinpoint.

A bug is closely tied to a software breakdown. This is where there is a negative alteration in how your television works at that time.

In other circumstances, a software malfunction or bug may be a transient issue that will resolve itself over time. In other circumstances, though, they are difficulties that must be handled.

• Unplug the television and hold the power button for 30 seconds.
• After 60 seconds, unplug and replug the television.
• Restart TV Using the Remote
• Wait a minute.
• Connect the TV to a different outlet
• Reset TV Using the Remote or Reset TV Without Using a Remote

Check The Power Source

As previously noted, the TV may become stuck on the logo when the power supply or connected devices change. The first step is to locate the power source.

If the adapter or socket to which you are attached is damaged or loose, it may be necessary to replace it.

If you can locate another adaptor, you can connect the television directly. Check the connected devices as well.

Check the HDMI cord if you are linked to a sound system or streaming device. If the cord is loose, try replacing it. You should also check the TV’s ports.

Hard Reset The Vizio TV

You may have to do things the hard way if the normal method does not work.

• Switch off your television but leave it hooked in.
• Keep both channel buttons on the TV remote depressed.
• On the TV remote, press and release the “Power” button.
• Release the channel buttons.
• On the TV remote, press the Vizio Menu button.
• The TV should switch on and display the menu.
• The presence of an “F” in the lower right corner indicates that you are on a factory setup screen.
• Hold down the “Menu” button for a few seconds.
• You should be able to access factory reset options from the Service Menu.

Do a Soft Reset

If you attempted the first step and the problem persists, you may need to perform a soft reset on the device. To perform a soft reset, simply follow these simple instructions.

Unplug the TV from the power source. Go to the TV and press and hold the power button. Hold the button down for approximately 60 seconds. You may release the button after 60 seconds.

Wait around 10 minutes after removing your hands from the power button before reconnecting the TV to the power source.

Press and hold the power button once more. Hold that till the TV comes back on. If the problem is caused by a tiny bug, this procedure should resolve it.

If the problem persists, you may need to try other options, which will be discussed further in the article.

Replace The EEPROM

EEPROM (electrically erasable programmable read-only memory) is a type of read-only memory (ROM) that allows users to erase and reprogram stored data in an application multiple times.

The EEPROM essentially records the state of your television at a specific point in time.

Don’t worry; this isn’t a difficult task. You only need to purchase an EEPROM prescribed by Vizio customer support based on the model of your TV set.

Then, by opening the back of your TV, replace the little 5mm EEPROM chip on the IC board with a new one.

An IC board in the green board is found in practically all electrical equipment, with extensive embedding.

Firmware Update

Suppose your TV was previously connected to the internet and a firmware update was downloaded. In that case, it must be updating its firmware in the background.

The most likely error here is that you unplugged the power source since you were upset because the TV was refreshing its logo and the power source was disconnected.

This may cause the TV to freeze on the logo. Allowing the TV some time to update and revert to its original state may be the best approach here.

Firmware upgrades are more crucial than software updates because they refresh the TV’s fundamental underlying functioning. It is akin to a BIOS upgrade in a computer.

TV-Out of Date

Modern televisions, like laptops and phones, are now ubiquitous. They also make use of firmware to function.

As a result, as time passes, the manufacturers of these televisions will continue to update the systems.

So, a smart TV will require firmware updates from time to time to keep up with growing technology and new products on the market.

Updates allow the TV to perform better, perform additional services, and connect to other networks more effectively.

As a result, if your TV has not been updated in a long time, it is conceivable that the current firmware is outdated, which might cause operational difficulties, such as becoming stuck on the logo.

Factory Reset Your Vizio Smart TV

If none of the methods worked and your Vizio tv is still stuck, you have one last option: factory reset. Follow the steps below to factory reset your Vizio smart tv.

• Press the Menu button with the Vizio remote.
• Choose the System Selection.
• Select Reset & Administrator and click OK.
• Choose Reset TV to Factory Settings and press OK.
• If prompted for a pin, enter 0000.
• Wait for the TV to resume after selecting reset and pressing OK.

Vizio Support

The final alternative is to summon television designers, who will undoubtedly know what to do.

If you have a warranty card and the TV is still under warranty, you can get a warranty.

The Vizio repairmen will come to your home, inspect the TV, and inform you of any problems.

They may even need to take the TV to a service center to fix any other problems that cannot be fixed at home.

Frequently Asked Questions

How Do You Unfreeze A Vizio TV?

You may unfreeze your television by power cycling it. Also, hard reset your TV by reverting it to factory defaults.

You can also try switching channels to see whether your TV is truly frozen.

So, follow these procedures to unfreeze a Vizio TV.

How Do I Hard Reset My Vizio TV?

Turn off your television and disconnect the power cable from the outlet.

Now, press and hold the power button for 5-7 seconds. After a few minutes, reconnect the power cable and turn it back on.

This should hard reset your television.

Why won’t my Vizio Smart TV turn on?

To reset the TV, disconnect it, then press and hold the power button ((on the TV set)) for 30 seconds before releasing it.

After waiting 10 minutes, reconnect the set and push and hold the power button until it turns on.

No way; the board’s memory has most likely failed. The EEPROM Memory or the main board may need to be replaced.

What does EEPROM mean on a Vizio TV?

The EEPROM acronym stands for electrically erasable programmable read-only memory, which is a type of computer semiconductor.

If it fails, no data is preserved between power cycles, and the TV remains locked on Logo and Frozen.

Resetting the EEPROM on your Vizio TV will reset it.

What should I do if my TV does not turn on?

If this does not solve the problem, perform a power cycle.

You can also shine a flashlight about 2 inches from the TV screen.

If you see an image, the inverter board is faulty and must be replaced.

Conclusion

Without a doubt, Vizio TV becoming stuck on the logo can be exhausting and negatively impact the user experience. If your Vizio TV is still stuck on the logo or another screen, it could be due to a hardware problem.

In some situations, you may need to replace the EEPROM, which is a read-only memory required for your Vizio television to function properly.

You can call a technician near you or Vizio tv for such troubles. The specialists at Vizio can assist you in resolving this issue.

To quickly resolve the problem, use the troubleshooting options suggested in this article.